HP rp3440 Installation Guide, Seventh Edition - HP 9000 rp3410 and HP 9000 rp3 - Page 47
DIMM Slot Identification, Installing System Memory, rp3410 Memory Configuration - maximum memory
View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Figure 1-35 DIMM Slot Identification Pair 6 (5A&5B) Pair 4 (3A&3B) Pair 2 (1A&1B) Rear Installing the System Installing Additional Components Cell 1 1A 3A 1B 3B 5A 5B Cell 0 Pair 1 (0A&0B) Pair 3 (2A & Pair 5 0B 2B 4B 0 2A 4A Front Quad 1 = Pair 1 & Pair 2 Quad 2 = Pair 3 & Pair 4 Quad 3 = Pair 5 & Pair 6 Installing System Memory rp3410 Memory Configuration T The HP 9000 rp3410 server supports DDR SDRAM DIMMs with ECC and chip spare protection. This server has 12 DIMM slots and supports a maximum of six GB of total system memory. Memory usage in the server varies with the model designation. In the original server (model A7136A), memory can be installed as one or two pairs in the first quad (group of four). This allows memory configurations of two, four, eight, or twelve DIMMs. In the current server (model A7136B), memory must be installed as quads (groups of four). This allows memory configurations of four, eight, or twelve DIMMs. Thus, the HP 9000 rp3410 server must include a minimum of 512 MB (model A7136A) or 1 GB (model A7136B) and can include up to six GB of memory in combinations of 256 MB, 512 MB, and 1 GB DIMMs. Different size DIMMs can be installed in the server, but all four DIMMs in a quad must be identical. Chapter 1 47