HP rp3440 Installation Guide, Seventh Edition - HP 9000 rp3410 and HP 9000 rp3 - Page 59

Secure the Captive Screws, Power Module Shims, Step 11.

Get HP rp3440 PDF manuals and user guides View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Figure 1-46 Secure the Captive Screws Installing the System Installing Additional Components CPU Install Tool (Torx T15) Step 11. Locate the two power pod module shims on the system board. (On servers delivered with only one dual processor module installed, the power module shims are held in place by screws with plastic spacers over the threads.) Remove the holding screws and discard the plastic spacers. Retain the screws for use when installing the power module. Figure 1-47 Power Module Shims Screws Spacers Shims Step 12. Slide the power pod module on the system board's metal mounting bracket so that the power pod module connector connects with its connector on the processor module. Chapter 1 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Installing the System
Installing Additional Components
Chapter 1
59
Figure 1-46 Secure the Captive Screws
Step 11.
Locate the two power pod module shims on the system board. (On servers delivered with only one
dual processor module installed, the power module shims are held in place by screws with plastic
spacers over the threads.) Remove the holding screws and discard the plastic spacers. Retain the
screws for use when installing the power module.
Figure 1-47 Power Module Shims
Step 12.
Slide the power pod module on the system board’s metal mounting bracket so that the power pod
module connector connects with its connector on the processor module.
CPU Install Tool
(Torx T15)
Shims
Spacers
Screws