HP rp3440 Installation Guide, Seventh Edition - HP 9000 rp3410 and HP 9000 rp3 - Page 26

Release the Rack Latches, Removing and Replacing the Top Cover on a Rack-Mounted Server - rails

Get HP rp3440 PDF manuals and user guides View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Installing the System Installing Additional Components Figure 1-10 Release the Rack Latches Step 3. Slide the server out of the rack until the guide-rail release clips are visible. Insert the Server into the Rack To insert the server into the rack, follow these steps: Step 1. Press the rail clips on either side of the server inward and push the server into the rack until it stops. Step 2. Verify that the rack latches are closed. Removing and Replacing the Top Cover on a Rack-Mounted Server Removal of this cover is necessary when installing or removing many components. Removing the Top Cover on a Rack-Mounted Server NOTE If you are replacing a hot-swappable item, you can leave the server on and external cables (including the power cord) connected. Step 1. Power off the server and disconnect the power and external cables from the back of the server. Step 2. Ensure the top cover lock keyswitch is in the unlocked position. Rotate the blue release lever toward the back of the server and slide the cover toward the back of the server. 26 Chapter 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Installing the System
Installing Additional Components
Chapter 1
26
Figure 1-10 Release the Rack Latches
Step 3.
Slide the server out of the rack until the guide-rail release clips are visible.
Insert the Server into the Rack
To insert the server into the rack, follow these steps:
Step 1.
Press the rail clips on either side of the server inward and push the server into the rack until it
stops.
Step 2.
Verify that the rack latches are closed.
Removing and Replacing the Top Cover on a Rack-Mounted Server
Removal of this cover is necessary when installing or removing many components.
Removing the Top Cover on a Rack-Mounted Server
NOTE
If you are replacing a hot-swappable item, you can leave the server on and external cables
(including the power cord) connected.
Step 1.
Power off the server and disconnect the power and external cables from the back of the server.
Step 2.
Ensure the top cover lock keyswitch is in the unlocked position. Rotate the blue release lever
toward the back of the server and slide the cover toward the back of the server.