HP rp3440 Installation Guide, Seventh Edition - HP 9000 rp3410 and HP 9000 rp3 - Page 58
Locking the Dual Processor Module in Place
View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Installing the System Installing Additional Components Figure 1-44 Locking the Dual Processor Module in Place CPU Install Tool (2.5 mm Driver/Allen Wrench) Step 9. Slide the sequencing retainer plate toward the front of the server. Figure 1-45 Slide the Sequencing Retainer Plate Step 10. Screw in the four heatsink captive screws in a criss-cross torquing pattern by alternately tightening the screws so as not to completely tighten one screw before the others. 58 Chapter 1
Installing the System
Installing Additional Components
Chapter 1
58
Figure 1-44 Locking the Dual Processor Module in Place
Step 9.
Slide the sequencing retainer plate toward the front of the server.
Figure 1-45 Slide the Sequencing Retainer Plate
Step 10.
Screw in the four heatsink captive screws in a criss-cross torquing pattern by alternately
tightening the screws so as not to completely tighten one screw before the others.
CPU Install Tool
(2.5 mm Driver/Allen
Wrench)