HP t150 Maintenance & Service Guide: HP MultiSeat 6000 Desktop, HP MultiSe - Page 13
Rear Panel Components, HP Multiseat ms6000
View all HP t150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Rear Panel Components Figure 1-3 Rear Panel Components Table 1-2 Rear Panel Components 1 RJ-45 Network Connector 6 DisplayPort Monitor Connector 2 Serial Connector 3 PS/2 Mouse Connector (green)* 7 VGA Monitor Connector 8 PS/2 Keyboard Connector (purple)* 4 Power Cord Connector 5 Universal Serial Bus (USB) 9 Line-Out Connector for powered audio devices (green) 10 Line-In Audio Connector (blue) The Microsoft MultiPoint Server operating system does not support PS/2 mouse and keyboard connectors on the HP MultiSeat ms6000 Desktop; a USB mouse and keyboard must be used instead. NOTE: Arrangement and number of connectors may vary by model. An optional second serial port and an optional parallel port are available from HP. The monitor connectors on the system board are inactive when a graphics card is installed in the computer. If a graphics card is installed into the PCI or PCI Express x1 slot, the connectors on the graphics card and the system board may be used at the same time. Some settings may need to be changed in Computer Setup to use both connectors. For information about setting the boot VGA controller, refer to the Computer Setup (F10) Utility Guide. HP Multiseat ms6000 3