HP t150 Maintenance & Service Guide: HP MultiSeat 6000 Desktop, HP MultiSe - Page 59
Installing a DIMM
View all HP t150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
4. Open both latches of the memory module socket (1), and insert the memory module into the socket (2). Figure 6-6 Installing a DIMM NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. A DIMM must occupy the black DIMM1 socket. Populate the DIMM sockets in the following order: DIMM1, DIMM3, DIMM2, then DIMM4. For maximum performance, populate the sockets so that the memory capacity is spread as equally as possible between Channel A and Channel B. Refer to Populating DIMM Sockets on page 47 for more information. 5. Push the module down into the socket, ensuring that the module is fully inserted and properly seated. Make sure the latches are in the closed position (3). 6. Repeat steps 5 and 6 to install any additional modules. The computer should automatically recognize the additional memory the next time you turn on the computer. Installing Additional Memory 49