IBM 847651U Handbook - Page 134
Working with memory modules, Settings.
UPC - 087944496366
View all IBM 847651U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Working with memory modules 4. Touch the static-protective package containing the DIMM to any unpainted metal surface in the server; then, remove the DIMM. 5. Position the DIMM above the connector so that the two notches on the bottom edge of the DIMM align properly with the connector. 6. Firmly push the DIMM straight down into the connector until the retaining clips close and snugly fit around both ends of the DIMM. Notches Note: Adding or removing DIMMs changes the configuration information in the server. When you restart the server, the system displays POST error 164. Start the Configuration/Setup Utility program and select Save Settings. 100 Netfinity 3000 User's Handbook
Working with memory modules
4.
Touch the static-protective package containing the DIMM to any
unpainted
metal surface in the server; then, remove the DIMM.
5.
Position the DIMM above the connector so that the two notches
on the bottom edge of the DIMM align properly with the
connector.
6.
Firmly push the DIMM straight down into the connector until
the retaining clips close and snugly fit around both ends of the
DIMM.
Notches
Note:
Adding or removing DIMMs changes the configuration
information in the server.
When you restart the server,
the system displays POST error 164.
Start the
Configuration/Setup Utility program and select
Save
Settings.
100
Netfinity 3000 User's Handbook