IBM 847651U Handbook - Page 75

Using the Configuration/Setup Utility program Product Data Select this choice to view the machine type and model, the system serial number, the system board identifier, and the revision level or issue date of the flash EEPROM (BIOS). Devices and I/O Ports Software recognizes ports from their port assignments. Each port must have a unique port assignment. The Configuration/Setup Utility program normally handles this, but you might have special hardware or software that requires you to change these assignments. Select the Devices and I/O Ports choice to view or change the assignments for devices and input/output ports. You can add serial ports by installing a serial adapter in an expansion slot. See the documentation that comes with the serial adapter for information about port assignments. To display or change the port assignments: 1. From the Configuration/Setup Utility program menu, select Devices and I/O Ports; then, press Enter. 2. The Devices and I/O Ports menu appears. 3. Select a device or port. If necessary, press Enter to display an additional menu. 4. Use the Left Arrow (←) or Right Arrow (→) key to advance through the settings. Chapter 3. Configuring your server 41