IBM 847651U Handbook - Page 229
SCSI Messages, Description, External SCSI
![]() |
UPC - 087944496366
View all IBM 847651U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
SCSI messages SCSI Messages All Description One or more of the following might be causing the problem: A failing SCSI device (adapter, drive, controller) An improper SCSI configuration or SCSI termination jumper setting Duplicate SCSI IDs in the same SCSI chain A missing or improperly installed SCSI terminator A defective SCSI terminator An improperly installed cable A defective cable Action: Verify that: The external SCSI devices are turned on. External SCSI devices must be turned on before you turn on the system. The cables for all external SCSI devices are connected correctly. If you have attached an internal or external SCSI device to the server, make sure that the SCSI termination is set correctly. See "Termination requirements" on page 111 for more information about SCSI termination. The SCSI devices are configured correctly. If the above are correct, run the diagnostic programs for additional information about the failing device. If the error recurs, have the system serviced. Chapter 5. Solving problems 195
![](/manual_guide/products/ibm-847651u-handbook-778b46d/229.png)