IBM 847651U Handbook - Page 164
over the microprocessor
![]() |
UPC - 087944496366
View all IBM 847651U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Working with microprocessors Note: The illustrations in this section might differ slightly from your hardware. c. Store the old microprocessor in a static-protective package. 3. Touch the static-protective package that contains the new microprocessor to any unpainted metal surface in the server; then, remove the new microprocessor. 4. Center the microprocessor 1 over the microprocessor connector 2 . Make sure the microprocessor is oriented and aligned correctly. If the microprocessor has tabs at the upper corners instead of an adapter with a handle, press inward on the retainer tabs until they click into place. 130 Netfinity 3000 User's Handbook
![](/manual_guide/products/ibm-847651u-handbook-778b46d/164.png)
Working with microprocessors
Note:
The illustrations in this section might differ slightly
from your hardware.
c.
Store the old microprocessor in a static-protective package.
3.
Touch the static-protective package that contains the new
microprocessor to any
unpainted
metal surface in the server;
then, remove the new microprocessor.
4.
Center the microprocessor
±1²
over the microprocessor
connector
±2²
.
Make sure the microprocessor is oriented and
aligned correctly.
If the microprocessor has tabs at the upper corners instead of an
adapter with a handle, press inward on the retainer tabs until
they click into place.
130
Netfinity 3000 User's Handbook