IBM 847651U Handbook - Page 284
Record adapter-slot configuration information for your server in the following table.
UPC - 087944496366
View all IBM 847651U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 284 highlights
Recording installed devices The following table shows the defaults for system memory and extended memory in your server. Record changes to existing memory and upgrades here. Table 16. RAM default settings and changes Option Default value System Memory Extended Memory DIMM 0 DIMM 1 DIMM 2 Total Memory New value Additional information 32 MB 32 MB 32 MB 64 MB 64 MB 64 MB 128 MB 128 MB 128 MB Record adapter-slot configuration information for your server in the following table. Table 17. Adapter-slot configuration information Slot Type IRQ DMA I/O port ROM/RAM address Option description and additional information 1 ISA 2 ISA 3 ISA 1 PCI 2 PCI 3 PCI AGP1 AGP Notes: 1. The dedicated Accelerated Graphics Port (AGP) slot is for AGP adapters only. For instructions on installing an AGP adapter in this slot, see "Installing or removing AGP adapters" on page 86. For information on the available AGP adapters, go to http://www.ibm.com/pc/compat/ on the World Wide Web. 2. You may install a video adapter in the dedicated AGP slot connector, in an ISA slot connector, or in a PCI slot connector. However, the server system board does not support the AGP video connector and the integrated video subsystem simultaneously. 3. For information about installing ISA and PCI adapters, see "Installing or removing ISA and PCI adapters" on page 82. 4. Before setting values, review "Resolving configuration conflicts" on page 57 and follow the instructions for avoiding configuration conflicts. 250 Netfinity 3000 User's Handbook