IBM 847651U Handbook - Page 256

Checking the system for damage Checking the system for damage This section provides instructions on what to do if your system might be damaged. After dropping it Look for loose cables and obvious damage. If any cables are loose, reconnect them securely. If there is obvious damage to the system, have it serviced. If you see no damage, turn on the system. If it works correctly, the system probably did not suffer any damage. If the system does not work correctly, turn it off and check the adapters and memory modules to ensure that they are connected correctly. Go to "Electrical safety" on page 70 and follow the instructions for opening your system; then, reseat all adapters and memory modules. If the system still does not work correctly, run the diagnostic programs from the Enhanced Diagnostics CD. See "Running the diagnostic test programs" on page 164. 222 Netfinity 3000 User's Handbook