IBM 847651U Handbook - Page 83

Using the Configuration/Setup Utility program 6. Enter your password again in the appropriate data field, 7. Define the Power-On Password Changeable by User field. The choices are: Yes The power-on password can be changed without entering the administrator password, if the administrator password is set. No The power-on password cannot be changed unless the administrator password is entered, if the administrator password is set. 8. To change an administrator password, select Change Administrator Password from the Administrator Password menu; then press Enter. Press Esc to exit. Attention administrator password users: If an administrator password is set and then forgotten, you must complete one of the following to regain access to the Configuration/Setup Utility program: If enhanced security is disabled (default setting), you must remove the server cover and move the Clear CMOS Request jumper on the system board. (See "Erasing lost or forgotten passwords" on page 254 for further information.) If enhanced security is enabled, you must replace the system board. To delete an administrator password: 1. From the Configuration/Setup Utility program menu, select System Security; then, press Enter. 2. The System Security menu appears. 3. Select Administrator Password; then, press Enter. 4. The Administrator Password menu appears. 5. Select Administrator Password. 6. Select Delete Administrator Password; then press Enter. Press Esc to exit. Chapter 3. Configuring your server 49