IBM 847651U Handbook - Page 188

4. When you add a hard disk drive and you want to include it in your startup sequence, use the Start Options selection of the Configuration/Setup Utility program (see "Start Options" on page 42). 5. When you install an ISA legacy adapter, you must allocate system resources to support it (see "ISA Legacy Resources" on page 55). 6. Make a record of all customized settings before you make any changes. 7. For more information on handling resource conflicts, see "Resolving configuration conflicts" on page 57. Record the new configuration information in Chapter 7, "Server records and specifications" on page 243. You might need to install device drivers after you install or replace options, or after you update the configuration settings. See the instructions that come with the option to determine if device drivers are required, and, if so, how to install them. In most situations, the ServerGuide software automatically installs your device drivers during the operating system installation process. Also, the video, SCSI, and Ethernet device drivers are on the IBM ServerGuide CDs. Refer to your ServerGuide documentation for instructions on configuring hardware and installing a network operating system. If you do not need to install any device drivers, or update or save the system configuration, your server is ready to use. Network operating system instructions If you do not use the ServerGuide software to install your network operating system (NOS), you must download system-specific NOS installation instructions and download device drivers. To obtain system-specific NOS installation instructions and the latest device drivers, access the IBM Web site at http://www.ibm.com/pc/support 154 Netfinity 3000 User's Handbook