Kenwood TH-D75 User Manual - Page 101

Group selection screen appears 4 Select a group to be skipped and press [A/B]. The lockout icon < >appears. 5 Press [PTT] to return to the frequency screen. Individual Lockout Setting You can lock out the specific repeaters in a repeater group. 1 Access Menu No. 210. World Region selection screen appears. 2 Select a World area and press [ENT]. Country & Reagion selection screen appears. 3 Select a Country & Reagion and press [ENT]. Group selection screen appears 4 Select a group and press [ENT]. Repeater list selection screen appears. 5 Select a repeater and press [A/B]. The lockout icon < >appears. 6 Press [PTT] to return to the frequency screen. Note: ¡ [FROM] or [TO] setting screen of the transmission settings can be accessed even if repeaters are set to Repeater lockout. ¡ Even if repeaters set to Repeater lockout are registered to a memory channel, they will not be the memory channel lockout. REPEATER LIST The repeater list is pre-installed at the time of purchase. Up to 1,500 repeaters can be registered in the repeater list. The repeater list can be added, edited, and deleted as needed. The repeater list is not cleared even after a full reset. Displaying the Repeater List 1 Access Menu No. 210. World area selection screen appears. 2 Select a World area and press [ENT]. Country & Reagion selection screen appears. 3 Select a Country & Reagion and press [ENT]. Group selection screen appears. 4 Select a group and press [ENT]. Repeater list selection screen appears. 5 Select a repeater and press [ENT]. Repeater details screen is set. 6 Press [PTT] to return to the frequency screen. Sorting the Repeater List 1 Select the repeater you want to move on the repeater selection screen. Repeater list menu screen appears. 2 Press [MENU] 3 Select [Move] and press [A/B]. Repeater list menu screen appears. 4 Select move position and press [A/B]. If you move an item to the end of the list, select [Move to End] and press [A/B]. Editing the Repeater List You can edit the repeater information. 1 Select the repeater you want to edit on the repeater selection screen. 2 Press [MENU] . 3 Select [Edit] and press [A/B]. Repeater list editing screen appears. 4 Select an item and press [ENT]. Editing screen of the selected item appears. 5 Edit the contents and press [Write] on the screen. Editing is completed. 6 Press [A/B] after editing. The Repeater list selection screen appears. Note: ¡ After editing in each edit window, the edited content will not be saved unless you confirm it by pressing [Write] in the repeater list edit window. ¡ The repeater which is set as the access repeater (FROM) or destination repeater (TO) in DR mode cannot be edited. Please edit the repeater information after changing the repeater setting. Repeater List Editing Menu Editing Menu Operation Name editing screen Edit the Repeater name. Sub Name editing screen Edit the Repeater sub-name. Callsign (RPT1) editing screen Edit the Repeater Callsign. Gateway (RPT2) editing screen Edit the Gateway Callsign. Lockout selecting screen Set [On] or [Off] to the repeater lockout. Frequency editing Edit the frequency. The frequency is corrected screen at 5 kHz step. Shift editing screen Select shift direction. Select [Off], [Plus], or [Minus]. Offset editing screen Edit the offset frequency. The offset frequency is corrected at 5 kHz step. Position accuracy editing screen Select [Invalid], [Approximate], or [Exact]. Latitude editing screen Edit the latitude. Longtitude editing screen Edit the longtitude. Time zone editing screen Edit the time zone. 16-15