Kenwood TH-D75 User Manual - Page 82
Setting Display, Aprs Voice, Setting Digipeater, Digipeat My Call
View all Kenwood TH-D75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
SETTING DISPLAY Display Area Selects the Display area. 1 Access Menu No. 573. SETTING DIGIPEATER The transceiver works as a standalone digipeater. Digipeat (My Call) Sets whether to run Digipeat (MyCall) when the transceiver is used as a digipeater. If the receiver packet path contains My Callsign (set in Menu No.500), the digipeat completion flag ( ) is added to My Callsign and the packet is digipeated. (e.g., "W4DJY-1" > "W4DJY-1 ") 1 Access Menu No. 580. 2 Select [Entire Always], [Entire Display] or [One Line]. [Entire Always]: The received new data, duplicate data, and My station data information appears on the full display, other data information appears only at the top of the display. [Entire Display]: The received new data information appears on the full display, other data information appears only at the top of the display. [One Line]: The received new data information appears only at the top of the display Note: ¡ When an emergency message or a message designated for your station is received, the received data information appears on the full display, even if the display method is set to [One Line]. Interrupt Time Set the duration to display an indication for when new data is received. If you select [Infinite], the indication cannot be canceled. 1 Access Menu No. 574. 2 Select [Off] or [On]. [Off]: Turns OFF the Digipeat (MyCall) function. [On]: Activates the Digipeat (MyCall) function. UIcheck This function will not digipeat a one-time received UI frame within the set UIcheck time. This applies to any of UIdigipeat, UIflood, and UItrace. 1 Access Menu No. 581. 2 Select [5], [10], [20]. [30], [60] seconds or [Infinite]. APRS VOICE This function is to announce the Callsign and information of the transmission source when an APRS signal is received. 1 Access Menu No. 575. 2 Select from [0], [1], [2] to [250] seconds. Note: ¡ The UI frame (Unnumbered Information frame) is used in APRS to exchange data without establishing a connection. UIdigipeat, UIfood and UItrace are all specialized UI frame forwarding methods. 2 Select [Off] or [On]. [Off]: Turn off the APRS Voice function. [On]: Turn on the APRS Voice function. Note: ¡ The APRS Voice (menu No. 575) operates regardless of the Voice Guidance mode setting (menu No. 916). 14-21