Kenwood TH-D75 User Manual - Page 91
DIRECT REPLY, AUTO REPLY FUNCTION, RX HISTORY, Sorting the Callsign
View all Kenwood TH-D75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Sorting the Callsign You can sort the Callsign list. 1 Press [MODE] in the Callsign list selection screen. The move position selection screen appears. 2 Select a move position and press [A/B]. When you move an item to the end of the list, select [Move to End] and press [A/B]. AUTO REPLY FUNCTION This function is to set automatically the Callsign of the other station and reply when a signal to your Callsign is received. 1 Select [Auto Reply] in the Digital Function Menu. 2 Select [Off], [On], or [On(Voice)]. • When [On] or [On(Voice)] is set, the < > icon appears on the display. DIRECT REPLY This function allows you to reply to a received call by simply pressing [PTT] while displaying the interrupt screen in DV and DR mode. The default setting is [On]. When a repeater signal is received in a DR mode and you immediately reply to a CQ or a call to your Callsign, the transmission setting is temporarily changed automatically and you can reply by simply pressing [PTT]. The < > icon appears in the interrupt screen when a direct reply is possible in receiving a call. If [PTT] is pressed when this icon appears, the setting is automatically changed to the reply setting and transmission becomes possible. Entire interrupt screen [On]: Transmission is possible with either the transmission message or GPS location information depending on the setting. Voice is not transmitted [On(Voice)]: An auto reply voice message recorded in the voice message memory in advance can be selected and transmitted. Transmission is possible with either the transmission message or GPS location information depending on the setting. Half interrupt screen Selecting the Auto Reply Voice Message You can select an auto reply voice message from the voice message memory. 1 Access Menu No. 312. Note: ¡ The change of the transmission setting are temporary. After display hold time elapses, it returns to the previous transmission setting. ¡ When receiving the repeater frequency in DV mode, you can not reply to a received call by pressing [PTT]. Setting Direct Reply to Off 1 Access Menu No. 612. 2 Select the voice file and press [A/B]. Note: ¡ Only one file can be selected. Auto Reply Timing You can set the Auto Reply timing. 1 Access Menu No. 613. 2 Select [Immediate], [5], [10], [20], [30], or [60] seconds. 2 Select [Off]. Note: ¡ You can change the display hold time by Menu No. 643. ¡ Direct reply is not possible when display method (Menu No. 640) is set to [Off]. ¡ When the direct reply is set to [On], the interrupt screen of DV and DR mode is displayed in priority than APRS mode. RX HISTORY Up to 100 entries containing information such as the Callsigns of the station that transmitted the signal and the repeater used can be stored in RX history for signals received in DV/ DR mode. The RX history is not cleared when the power is switched OFF. 16-5