Kenwood TH-D75 User Manual - Page 103
Clearing the Hotspot List, MENU], Write], Hotspot List Editing Menu
View all Kenwood TH-D75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
2 Press [MENU] . Hotspot list menu screen appears. Clearing the Hotspot List Clear hotspot from the hotspot list. 1 Select the hotspot you want to clear on the hotspot selection screen. 3 Select [Edit] and press [A/B]. Hotspot list editing screen appears. 2 Press [MENU] on the hotspot selection screen. The hotspot list menu will appear on the display. 3 Select "Clear" and press [ENT]. 4 Select an item and press [ENT]. Editing screen of the selected item appears. 5 Edit the contents and press [Write] on the screen. Editing is completed. 6 Press [A/B] after editing. The Hotspot list selection screen appears. Note: ¡ The hotspot which is set as the access repeater (FROM) in DR mode cannot be edited. Please edit after changing the access repeater setting. Hotspot List Editing Menu Editing Menu Operation Name editing screen Edit the Hotspot name. Sub Name editing screen Edit the Hotspot sub-name. Callsign (RPT1) editing screen Edit the Repeater Callsign. Gateway (RPT2) editing screen Edit the Gateway Callsign. Lockout selecting screen Set [On] or [Off] to the DR Scan lockout. Frequency editing Edit the frequency. The frequency is corrected screen at 5 kHz or 6.25 kHz step. Shift editing screen Select shift direction. Select [Off], [Plus], or [Minus]. Offset editing screen Edit the offset frequency. In the case of Simplex, set all girders to "0". The offset frequency is corrected to 5kHz or 6.25kHz step. Position accuracy editing screen Select [Invalid], [Approximate], or [Exact]. Latitude editing screen Edit the latitude. Longtitude editing screen Time zone editing screen Edit the longtitude. Edit the time zone. 4 Press [A/B]. The hotspot is deleted and returns to the hotspot selection screen. Note: ¡ The hotspot which is set as the access repeater (FROM) in DR mode cannot be cleared. Please clear the hotspot information after changing the access repeater setting. 16-17