Kenwood TH-D75 User Manual - Page 16
Menu Mode, Menu Access, Character Entry
View all Kenwood TH-D75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
6 MENU MODE Many functions on this transceiver are selected or configured through the Menu instead of physical controls. MENU ACCESS Example: Setting the time for [Battery Saver] of Menu No. 920. 1 Press [MENU]. The transceiver enters the Menu mode. The icon currently selected by the cursor is highlighted, and the item name is displayed at the bottom of the screen. (Example: TX/RX) Software Key operation Software keys ([Back], [OK], etc.) are displayed in the key guide area of various setting screens and other screens. To select or operate the displayed functions, press the corresponding keys. Example: [Back] Press [MODE]: Returns to the previous screen without confirming the displayed setting. [OK] Press [A/B]: Changes to the next screen. Directly Entering a Menu Number (Direct Access) You can also directly enter a menu number using the number keys from this screen. Press [PF1], [MR], [MARK] for Menu No.920. In this case, you can move to step 4. 2 Select [Configuration] with [ ]/[ ] or [ENC] control and press [A/B]. 3 Select [Battery] with [ ]/[ ] or [ENC] control and press [A/B]. CHARACTER ENTRY In the screens that require you to enter text such as the screen for entering a memory name or power-on message, there are two methods to enter text. One is to enter text using the number keys in the same ways as a mobile phone and the other is to enter text by selecting characters one by one with the Multi-Scroll Key or [ENC] control. Keypad Character Entry 1 Enter text with [0] to [9 and [ENT]. • The each press of a key changes the character that can be entered. • To enter another character assigned to the same key, move the cursor to the next position with [ ] ([ ] moves the cursor to the previous position) and enter the next character. • Pressing [A/B] deletes a character. The character at the cursor position is deleted. The backspace operation is performed when there is a blank space. • Pressing [ ]/[ ] moves the cursor. Example: Entering the power-on message (Menu No.903) 4 Select [Battery Saver] with [ ]/[ ] or [ENC] control and press [A/B]. 5 Select a setting value with [ ]/[ ] or [ENC] control and press [A/B] to set the value. 6 Press [MENU]. The menu mode ends and the frequency screen appears. For subsequent menu operations, steps 1 to 4 will be referred to as "Access Menu No. XXX". Note: ¡ Pressing [PTT] during each operation ends menu mode without confirming the setting. ¡ Pressing [MODE] during each operation returns to the previous screen. Also, pressing [MODE] during step 4 discards the new setting value and returns to the previous operation. ¡ Pressing [MENU] in scanning cancels scan. • Pressing [MODE] input the space. • Pressing [A/B] clears the text. 2 Press [ ]. The cursor moves to the right. 3 Press [ENT]. The text is confirmed and text input ends. 6-1