Kenwood TH-D75 User Manual - Page 57
Battery Saver GPS Save, GPS Data PC Output, Sentence, Key operations in [GPS satellite information]
View all Kenwood TH-D75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Key operations in [GPS satellite information] Key Name Operation [] Switches to [Target point distance and Target direction] screen. [] Switches to FM radio frequency screen when FM radio mode is On. [MODE] Switches to [Target point distance and Target direction] screen. [MENU] Switches to the menu screen. [A/B] Switches to FM radio frequency screen when FM radio mode is On [MARK] Switches to the registration mode of mark position. Battery Saver (GPS Save) This function will turn the GPS power source Off after the programmed timer expires if position data is not determined during the maximum catching time (approximately 5 minutes). To prevent unnecessary battery consumption, when there are many reception satellites, the GPS is stabilized and position data can be determined, the GPS power source repeatedly turns On and Off. 1 Access Menu No. 404. GPS Data PC Output Turn this function on when you want to send the built-in GPS receiver data (NMEA) from the USB connector or Bluetooth. 1 Access Menu No. 405. 2 Select [Off] or [On]. [Off]: The built-in GPS receiver data (NMEA) is not output from the USB connector or Bluetooth. [On]: The built-in GPS receiver data (NMEA) is output from the USB connector or Bluetooth. Note: ¡ When the built-in GPS receiver data (NMEA) is output, the communication speed (baud rate) is maximum 12 Mbps for USB and maximum 128 kbps for Bluetooth. ¡ You can select USB or Bluetooth by Menu No. 981. Sentence Configure the built-in GPS receiver data (NMEA) output to the PC. 1 Access Menu No. 406. 2 Select [Off], [1], [2], [4], [8] minutes, or [Auto]. [Off]: The built-in GPS receiver function is always On. [1 min] to [8 min]: When set to 1, 2, 4, or 8 minutes, the GPS off time starts at the selected duration if position data is not determined during the maximum catching time (approximately 5 minutes). [Auto]: When set to Auto, the GPS Off time starts at 1 minute for the first time, then progresses to 2 minutes, 4 minutes and 8 minutes each additional time. The GPS Off time remains at 8 minutes thereafter. However, after having determined your position for the duration, if the GPS cannot pinpoint your location, the GPS Off time will restart at 1 minute. Note: ¡ Position precision may be improved by setting the Battery Saver (GPS Save) function to [Off]. ¡ When GPS cannot be received, turn the power ON in a clear environment (Open Sky). 2 Select [$GPGGA], [$GPGLL], [$GPGSA], [$GPGSV], [$GPRMC], and/or [$GPVTG]. 3 Press [ENT]. Each press adds or removes a check mark. 4 Press [A/B]. Note: ¡ You cannot remove all sentences. 13-3