Kenwood TH-D75 User Manual - Page 115
Fm Radio, Turning On Fm Radio Mode, Editing The Fm Radio Memory Channel List
View all Kenwood TH-D75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
21 FM RADIO The transceiver can receive FM radio broadcasts. You can listen to FM radio while simultaneously monitoring two signals as well as while waiting for a CQ or a call from an acquaintance, or waiting for an APRS call. When the band A or B receives a signal (call from another party) and squelch is open, the radio sound is muted so that you can hear the other party's voice. Note: ¡ You can not turn on the FM radio mode when selecting the following frequency bands in band B. (LF/MF(AMBC), HF, 50, FMBC) ¡ You can not turn on the FM radio mode when [priority scan] (Menu No. 134) or [WX alert] (Menu No. 105) is On, and [Detect Out Select] (Menu No. 102) is set to [IF] or [Detect]. TURNING ON FM RADIO MODE 1 Access Menu No. 700. [On]: Turns on the FM radio function. [Off]: Turns off the FM radio function. When this is set to [On], the mode becomes FM radio mode, the frequency screen appears, and the FM radio icon < > appears. 2 Select a frequency with [ ]/[ ] or [ENC] control. Frequency Direct Entry (Direct Station Selection) 1 Press [ENT]. The mode becomes frequency direct input mode. 2 Enter a frequency using the number keys. Radio Scan 1 Press [A/B]. The MHz dot flashes and scanning begins. Change the scan direction with [ ]/[ ] or [ENC] control. When a broadcast station with a signal is found, scanning stops at that frequency, is displayed, and scanning ends. Note: ¡ When you receive the signal of the band A or B while displaying the FM radio mode screen, it switches to the frequency screen or interrupt screen of the band A or B. A few seconds after reception, the screen returns to FM radio mode. ¡ During transmission using [PTT], the screen switches to the band A/B frequency display screen. A few seconds after transmission, the screen returns to FM radio mode. ¡ If you want to listen to the FM radio broadcast only, it is recommended that you receive in the FM broadcast band in the single band mode of the band B. ¡ When FM radio mode is On, Menu No.105, 134, 200, 203, 204, 210, and 220 can not be selected. 2 Press [A/B], and Radio scan stops. EDITING THE FM RADIO MEMORY CHANNEL LIST FM broadcast stations for up to ten channels can be registered to the FM radio memory channel list.You can assign names and edit the registered broadcast stations. Registering FM Radio Stations Register the FM radio stations you listen to frequently to FM radio memory channels. 1 Switch to FM radio mode and select a broadcast station you wish to register. 2 Press [F], [MR]. The store in the FM radio memory channel screen appears. 21-1