Kenwood TH-D75 User Manual - Page 26

8 MEMORY CHANNEL In Memory channels, you can store frequencies and related data that you often use. Then you need not reprogram the data every time. You can quickly recall a programmed channel by simple operation. A total of 1101 Memory channels (1000 Memory channels, 100 Program scan memory channels, and a Priority scan memory channel) are available. SIMPLEX & REPEATER OR ODD-SPLIT MEMORY CHANNEL? You can use each memory channel as a simplex & repeater channel or as an odd-split channel. Store only one frequency to use as a simplex & repeater channel or two separate frequencies to use as an odd-split channel. Select either application for each channel depending on the operations you have in mind. Simplex & repeater channels allow: • Simplex frequency operation • Repeater operation with a standard offset (if an offset direction is stored) Odd-split channels allow: • Repeater operation with a non-standard offset The data listed below can be stored in each Memory channel: Parameter Receive frequency Transmit frequency Receive frequency step size Transmit frequency step size Offset direction Tone On/Off Tone frequency CTCSS On/Off CTCSS frequency DCS On/Off DCS code Shift Reverse On/Off Memory channel lockout *2 Memory channel name Demodulation mode Cross tone Fine mode (Digital squelch) type * (Digital squelch) digital code * Destination Callsign * Access repeater Callsign * Destination repeater Callsign * Simplex & Repeater Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Odd-split Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes No No Yes Yes Yes Yes Yes No No No No No Note: ¡ Program scan memory and priority scan memory are excluded. ¡ *: Data for the digital mode (DV/DR) MEMORY CHANNEL LIST The memory channel configurations can be displayed on the Memory Channel List screen. In the Memory Channel List screen, you can select a channel to store or to recall. You can assign a name to a Memory Channel. 1 Press [MR] to switch to the memory mode. 2 Press [ENT]. Memory channel list appears. You can also access to the memory channel list by Menu No. 200. Memory channel type Display [0] to [999] [L 0], [U 0] to [L49], [U49] [Pri] [A 1] to [A10] [C] Type Memory channels Program scan memory Priority scan memory Weather channels (TH-D75A only) CALL channels 3 Select the channel. You can select the channel by inputting the channel number from 0 to 999 by 12 keypad. When you select 1 or 2 digits channel, you can also select by inputting the channel number and pressing [ENT]. 4 Press [ENT]. The selected channel is set and return to the frequency display. Switching Memory Name Display The memory channel list display can be switched to frequency display or memory name. 1 Press [A/B]. Each press switches between frequency display and memory name display. 8-1