Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 129

Section 6 OTHER CONVENIENT FUNCTIONS 2 Select the desired magnification ratio. If you want to have the copy magnification ratio selected automatically, press the "Auto %" key. If you want to manually set the magnification ratio, press the "# keys" ["#-Keys"] key and then enter the desired ratio with the keypad, or press the "+" key or the "-" key to change the displayed magnification ratio to the desired setting in 1% increments. You can also select the magnification ratio by pressing the preset zoom ratio keys at the right that corresponds to the desired ratio. Inch specifications Ready to Job build.(Full-color) Place originals then press Start key. Reduce/Enlarge Standard Zoom XY Zoom (25 400) 100 % # keys Back Auto % 100% 400% 200% 51/2x81/2 11x17 154% 51/2x81/2 129% 81/2x11 121% 81/2x14 78% 81/2x14 81/2x14 11x17 11x17 81/2x11 set Close 77% 11x17 64% 11x17 50% 11x17 25% 81/2x14 81/2x11 51/2x81/2 Metric specifications Ready to Job build.(Full Col.) Set original. Press Start key. Reduce/Enlarge Back Standard Zoom XY Zoom (25 400) 100 % AMS 100% 141% A 4 A 3 A5 A4 127% #-Keys Folio A 3 400% 106% 11x15” A 3 200% 90% A5 A3 Folio A 4 set Close 75% 11x15” A 4 70% A 3 A 4 A4 A5 50% 25% 3 Press the "Close" key. The touch panel will return to the screen in step 1. Specifying the direction that the originals were set This procedure specifies the direction of the set originals. 1 With the content of the "Basic" tab displayed, press the "Orig.set direction" key. The "Orig.set direction" screen will be displayed. Inch specifications Ready to Job build.(Full-color) Place originals then press Start key. Job Build - Step 1 11x81/2 Select paper Offset Finished Basic 1 sided Original type Auto % Reduce /Enlarge Quality 1 sided copy 1 sided/ 2 sided Top Edge Orig. set direction Edit 1 sided copy-Left Finished page #: 0 set End Insert page Metric specifications Ready to Job build.(Full Col.) Set original. Press Start key. Job Build - Step 1 Select paper Group Finished Basic 1-sided Original type AMS Reduce/ Enlarge Quality 1-sided Copy 1-sided/ 2-sided Back Edge Orig. set direction Edit 1-sided Copy-Left Finished page #: 0 set End Insert blank page 2 Press the "Top Edge" ["Back Edge"] key or the "Left top Edge" key, as appropriate, according to the direction of the originals. Inch specifications Ready to Job build.(Full-color) Place originals then press Start key. Orig. set direction "Select Original Image Direction." can be shown at right side of display. Follow the steps. If setting mode is wrong, incorrect copy will result. set Back Close Select Original Image Direction. Top Edge Left Top Edge Metric specifications Ready to Job build.(Full Col.) Set original. Press Start key. Orig. set direction "Check direction original" can be shown at right side of display. Follow the steps. If setting mode is wrong, incorrect copy will result. set Back Close Check direction Check direction of original. Back Edge Left top corner IMPORTANT! If the designation for the direction that the originals are set is not correct, copying may be accomplished incorrectly. 3 Press the "Close" key. The touch panel will return to the screen in step 1. 6-77