Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 243
adjustment performed automatically., The color pattern will be scanned and auto color
View all Kyocera KM-C4008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
5 Press the "On" key. A corresponding color pattern will be printed out. Inch specifications Auto gray adjust Close You can adjust original image quality. Section 7 COPIER MANAGEMENT 8 Press the [Start] key. The color pattern will be scanned and auto color adjustment performed automatically. Default setting - User adjustment Metric specifications Auto Grey Adjust You can adjust original image quality. Default setting - User adjustment On Close On 9 Once adjustment is completed, the touch panel will return to the screen in step 5. Inch specifications Auto gray adjust Close You can adjust original image quality. NOTE Make sure there 11" × 8 1/2" [A4] size paper loaded in one of the drawers[cassettes]. 6 Once that pattern has been printed out, set it on the platen. NOTES • Set the color pattern on the platen so that the 3 squares are located towards the rear of the platen as shown in the illustration. • BE SURE to place the color pattern face-down on the platen. • To cancel the auto color adjustment procedure, simply press the "Cancel" key. 7 Close the original cover. Default setting - User adjustment Metric specifications Auto Grey Adjust You can adjust original image quality. On Close On Default setting - User adjustment 10 Press the "Close" key. The touch panel will return to the screen in step 3. 11 Press the "Close" key. The touch panel will return to the screen in step 2. Press the "End" key. The touch panel will return to the contents of the "Basic" tab. 7-103