Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 177

Default copy limit Perform the following procedure when you want to change the default copy limit for new department ID-codes. 1 Select "Def. Val. of coun. limit" under the "Setting item" column on the left side of the touch panel and then press the "Change #" key. The "Def. Val. of coun. limit" screen will be displayed. Inch specifications Managem. Def. Set. Close Setting item Value Scanner Managem. Fax Management Excess of limit Setting Def. Val. of coun. limit Total size 1 Total size 2 Total size 3 On On Unable to us 999999 81/2x11" No specif. 11"x17" No specif. 81/2x11" No specif. Default setting - Management - Managem. Def. set. Change # Metric specifications Managem. Def. Set. Close Setting item Scanner Managem. Fax Management Excess of limit Setting Def. Val. of coun. Limit Total size 1 Total size 2 Total size 3 Value On On You cannot u 999999 A3 No specif. A4 No specif. B4 No specif. Default setting - Management - Managem. Def. set. Change # Section 7 COPIER MANAGEMENT 2 Use the numeric keys on the keypad to enter the default copy limit. The limit can be set to any 1-page increment up to 999,999. Inch specifications Def. Val. of coun. limit Default value of counter limit can be set. Back Close (1~999,999) Limited value 999,999 clear Default setting - Management - Managem. Def. set. Metric specifications Def. Val. of coun. Limit Default value of counter limit can be set. Back Close (1~999,999) Limited value 999,999 clear Default setting - Management - Managem. Def. set. NOTE If you want to quit the displayed setting without changing it, press the "Back" key. The touch panel will return to the screen in step 1. 3 Press the "Close" key. The touch panel will return to the screen in step 1. 7-37