Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 202

Section 7 COPIER MANAGEMENT Auto sleep ON/OFF Perform the following procedure to set whether or not to have the auto sleep function automatically turn the power switch OFF a certain amount of time after copying, or if no operation has been performed on the copier during that time. 1 Display the "Machine default" screen. (See "Accessing the machine default settings" on page 7-44.) Inch specifications Default setting / Counter Default setting Copy default Machine default Language MP tray setting Register orig. size Management Print report End Counter check User Adjustment Metric specifications Default setting / Counter Default setting Copy default Machine default Language Bypass setting Register orig. size Management Print report End Counter check User Adjustment 2 Select "Auto sleep" under the "Default menu" column on the left side of the touch panel and then press the "Change #" key. The "Auto sleep" screen will be displayed. Inch specifications Default setting / Counter Machine default Default menu Silent mode Date/Time Time difference Management code change Auto sleep Default setting Setting mode Off 01/01/'03 14:00 GMT+00:00 4000 On Change # Close Up Down Metric specifications Default setting / Counter Machine default Default menu Silent mode Date/Time Time difference Change MGMT code with # Auto sleep Default setting Setting mode Off 01/01/'03 14:00 GMT+00:00 3100 On Change # Close Up Down 3 Press the "On" key if you want to use the auto sleep function. Inch specifications Auto sleep Autom. turns into sleep mode if no oper. within a set time after last setting,or when copying is done. Back Close On Off Default setting - Machine default Metric specifications Auto sleep Back Close Automatically turns into sleep mode if no operation within a set time after last setting,or when copying is done. On Off Default setting - Machine default NOTES • If auto sleep interferes with your copying operations, turn this function OFF. However, it is recommended that you try to set a longer time interval until auto sleep engages before you actually turn it OFF. • If you want to quit the displayed setting without changing it, press the "Back" key. The touch panel will return to the screen in step 2. 4 Press the "Close" key. The touch panel will return to the screen in step 2. 5 Press the "Close" key once again. The touch panel will return to the "Default setting" screen. 6 Press the "End" key. The touch panel will return to the contents of the "Basic" tab. 7-62