Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 244

Section 7 COPIER MANAGEMENT Drum refresh Perform the following procedure if it seems like the printed image is blurred or running, or if there are unprinted white areas on the page. The drum refreshing operation will take approximately 5 minutes. 1 With the content of the "Basic" tab displayed, press the [Default Setting/Counter] key. The "Default setting" screen will be displayed. 3 Press the "Drum refresh" key. The "Drum refresh" screen will be displayed. Inch specifications Default setting / Counter User adjustment Close Auto gray adjust Drum refresh 2 Press the "User adjustment" key. Inch specifications Default setting / Counter Default setting Copy default Machine default Language MP tray setting Register orig. size Management Print report End Counter check User Adjustment Metric specifications Default setting / Counter Default setting Copy default Machine default Language Bypass setting Register orig. size Management Print report End Counter check User Adjustment Default setting Metric specifications Default setting / Counter User adjustment Close Auto Grey Adjust Drum refresh Default setting 4 Press the "On" key. The drum refreshing process will begin. This operation will take approximately 5 minutes. Inch specifications Drum refresh Refresh the drum when image blur or white dots appear on the image. Close Default setting - User adjustment Metric specifications Drum refresh Refresh the drum when a white omission in outputted copie image. On Close On Default setting - User adjustment 7-104