Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 281

2 Operate the paper conveyor release lever and pull the paper conveyor unit out towards you as far as it will go. Section 9 TROUBLESHOOTING 5 Grasp the handle (marked with an "A" and shown as (2) in the illustration) to the inner cover and open that cover. (2) WARNING High voltage is present in the charger section. Take sufficient care when working in this area, as there is a danger of electrical shock. CAUTION The copier's fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger of getting burned. 3 Grasp the green handle (shown as (1) in the illustration) on the left cover to the fixing section and open that cover. (1) 6 Remove the jammed paper without tearing it. If the paper is difficult to remove at all, turn the green fixing gear (shown as (3) in the illustration) to the left. The misfed paper will be fed out to a location that makes it easier to remove. (3) NOTES • The fixing gear will only turn in the direction indicated in the illustration. • If the paper does happen to tear, remove any loose scraps from inside the copier. 7 Close all open covers. NOTE Be sure to hold the middle handle (marked with a "B" and shown as (4) in the illustration) when you close the inner cover to the fixing unit. 4 Open the upper cover to the fixing section. (4) 9-13