Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 279

2 Operate the paper conveyor release lever and pull the paper conveyor unit out towards you as far as it will go. Section 9 TROUBLESHOOTING 5 Remove the jammed paper without tearing it. If the paper is difficult to remove at all, turn the black transfer drum dial (shown as (2) in the illustration) towards you. The misfed paper will be fed out to a location that makes it easier to remove. (2) WARNING High voltage is present in the charger section. Take sufficient care when working in this area, as there is a danger of electrical shock. CAUTION The copier's fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger of getting burned. 3 Turn the green transfer unit release lever to the left until it reaches a vertical position. NOTE If the paper does happen to tear, remove any loose scraps from inside the copier. IMPORTANT! The transfer drum (shown as (3) in the illustration) is extremely sensitive to dirt. Do not to touch the drum with your hands. (3) 6 Replace the transfer unit in its original position in the copier. 4 Grasp the transfer unit handle (shown as (1) in the illustration) and pull the transfer unit out towards you as far as it will go. (1) 9-11