Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 289
MAINTENANCE AND OPERATION INFORMATION, Cleaning the copier,
View all Kyocera KM-C4008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
Section 10 MAINTENANCE AND OPERATION INFORMATION Cleaning the copier CAUTION For safety purposes, ALWAYS remove the power plug from the outlet when performing cleaning operations. Cleaning the original cover Lift open the original cover. Wipe the back side of the original cover with a soft cloth dampened with alcohol or mild detergent. * Never use thinner or other organic solvents to clean the original cover. Cleaning the platen Lift open the original cover. Wipe the platen with a soft cloth dampened with alcohol or mild detergent. * Never use thinner or other organic solvents to clean the platen. * If copies appear soiled, such as black lines appearing on the copy image, while using the optional Document Processor, the slit glass (a) is dirty. Wipe the slit glass with a dry cloth or a soft cloth dampened with alcohol. * Never use water, thinner or organic solvents. (a) NOTE When the slit glass becomes dirty, "Clean the slit glass for original fed from DP." ["Clean the slit glass for original fed."] may appear. In this case, perform the cleaning operation on the slit glass and then touch the "End" key. Inch specifications Clean the slit glass for original fed from DP. Open the document processor. Clean the surface of narrower glass located at left with a dry cloth. Please close the document processor. Press END key If the slit glass is dirty, black line will appear on the copy. End Metric specifications Clean the slit glass for original fed. Open the document processor. Clean the surface of narrower glass located at left with a dry cloth. Please close the document processor. Press END key If the slit glass is dirty, black line will appear on the copy. End 10-1