Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 201

Changing the management code Perform the following procedure to change the management code used by the copy manager. IMPORTANT! If you change the management code from its factory default, be sure to keep some sort of record of the new management code. If, for any reason, you forget the registered management code, you will need to contact your service representative. 1 Display the "Machine default" screen. (See "Accessing the machine default settings" on page 7-44.) Inch specifications Default setting / Counter Default setting Copy default Machine default Language MP tray setting Register orig. size Management Print report End Counter check User Adjustment Metric specifications Default setting / Counter Default setting Copy default Machine default Language Bypass setting Register orig. size Management Print report End Counter check User Adjustment 2 Select "Management code change" ["Change MGMT code with #"] under the "Default menu" column on the left side of the touch panel and then press the "Change #" key. The "Management code change" ["Change MGMT code with #"] screen will be displayed. Inch specifications Default setting / Counter Machine default Default menu Silent mode Date/Time Time difference Management code change Auto sleep Default setting Setting mode Off 01/01/'03 14:00 GMT+00:00 4000 On Metric specifications Default setting / Counter Machine default Default menu Silent mode Date/Time Time difference Change MGMT code with # Auto sleep Default setting Setting mode Off 01/01/'03 14:00 GMT+00:00 3100 On Change # Close Up Down Change # Close Up Down Section 7 COPIER MANAGEMENT 3 Use the keypad to enter a new 4-digit management code. Inch specifications Management code change Able to change management code.(# key) Back Close Default setting - Machine default Metric specifications Change MGMT code with # Able to change management code. (# key) Back Close Default setting - Machine default NOTE If you want to quit the displayed setting without changing it, press the "Back" key. The touch panel will return to the screen in step 2. 4 Press the "Close" key. The touch panel will return to the screen in step 2. 5 Press the "Close" key once again. The touch panel will return to the "Default setting" screen. 6 Press the "End" key. The touch panel will return to the contents of the "Basic" tab. 7-61