Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 66

Section 6 OTHER CONVENIENT FUNCTIONS 7 If you want to create a margin on the back side of the copies that lines up with that on the front side, press the "Auto" key. If you want to set the margins for the front and back sides separately, press the "Front/Back margin" key. The screen to set the back side margin will be displayed. Inch specifications 10 Press the [Start] key. Copying will start. Ready to copy.(Full-color) Back page margin Auto Front/Back margin If "AUTO" is selected for duplex copying, rear will have same margin setting as that for the front page. Paper Size Set 11x81/2 Back Close Select Original Image Direction. Top Edge Left Top Edge Metric specifications Ready to copy.(Full Col.) Back page margin Auto Front/Back margin If "AUTO" is selected at the duplex copying, back side will have same margin setting as that for the front page. Paper Size Set Back Close Check direction Check direction of original. Back Edge Left top corner 8 Use the "S" key, the "T" key, the "W" key and the "X" key to select the desired location and width of each margin. Inch specifications Ready to copy.(Full-color) Back page margin Back page Auto Front/Back margin ( 0 3/4) 0" ( 0 3/4) 0" Paper Size Set 11x81/2 Back Close Select Original Image Direction. Top Edge Left Top Edge Metric specifications Ready to copy.(Full Col.) Back page margin Back page Auto Front/Back margin ( 0 18) 0 mm ( 0 18) 0 mm Paper Size Set Back Close Check direction Check direction of original. Back Edge Left top corner 9 Follow the instructions on the right side of the touch panel and verify the direction in which the originals were set. IMPORTANT! If the designation for the direction that the originals are set is not correct, copying may be accomplished incorrectly. 6-14