Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 172

Section 7 COPIER MANAGEMENT Non-standard printer driver printout (Printer) Perform the following procedure when "On" is selected as the "Printer function management ON/OFF" setting and you want to want to allow the use of printer drivers other than those available under copy management. NOTE This setting will only be available when "On" is selected as the "Printer function management ON/OFF" setting. 1 Select "Others Mgt. Reg. (print)" under the "Setting item" column on the left side of the touch panel and then press the "Change #" key. The "Others Mgt. Reg. (print)" screen will be displayed. Inch specifications Managem. Def. Set. Close Setting item Value Copy management On Print. Managem. On Printer error report On Others Mgt. Reg. (print) On Copy/Printer output mgt. All Scanner Managem. On Fax Management On Default setting - Management Change # Metric specifications Managem. Def. Set. Close Setting item Value Copy management On Print. managem. On Printer error report On Others mgt. Reg. (print) On Copy/Printer output mgt. All Scanner Managem. On Fax Management On Default setting - Management Change # 2 To allow the use of printer drivers other than those available under copy management, press the "On" key. Inch specifications Others Mgt. Reg. (print) Output. of print. is possible for unspecif. ID-code. Back Close Off On Default setting - Management - Managem. Def. set. Metric specifications Others mgt. Reg. (print) Output of print. is possible for unspecif. ID-code. Off On Default setting - Management - Managem. Def. set. Back Close NOTE If you want to quit the displayed setting without changing it, press the "Back" key. The touch panel will return to the screen in step 1. 3 Press the "Close" key. The touch panel will return to the screen in step 1. 7-32