Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 34

Section 3 PREPARATIONS Loading paper into drawer[cassette] Up to 500 sheets of standard paper (60 g/m² - 90 g/m²) or color paper can be loaded into the drawer[cassette] that is included with your copier. Up to 250 sheets of paper can be loaded into each drawer[cassette] of the optional Paper Feeder. • Duplex copier (for 2-sided copies): One 500-sheet capacity drawer[cassette] • Acceptable sizes of paper 500-sheet capacity drawers[cassettes]: 11" × 8 1/2", 8 1/2" × 14", 11" × 17", A5R, B5R, A4, B4 and A3 250-sheet capacity drawers[cassettes]: 8 1/2" × 11", 11" × 8 1/2", 8 1/2" × 14", 11" × 17", A5R, B5R, A4R, A4, B4 and A3 • The 500-sheet capacity drawers[cassettes] will not accept 8 1/2" × 11" [A4R] size paper. • Neither type of drawer[cassette] will accept 5 1/2" × 8 1/2" or 8 1/2" × 5 1/2" size paper. IMPORTANT! • BE SURE to use paper that is specified for color copy use in order to make clear color copies. • DO NOT use paper such as that designated for inkjet printers or any paper treated with special coating. • Specify the type of paper that is loaded into each drawer[cassette] (plain, recycled, etc.) under "Paper type (drawer[cassette] No.2 - No.4)" on page 7-47. 1 Pull the drawer[cassette] out toward you as far as it will go. 2 Open the paper feed unit (1). (1) NOTE DO NOT touch the rollers (2). (2) 3 Pinch the levers for the paper width guide plates and move the plates to fit the width of the paper that is to be loaded in that drawer[cassette]. The paper sizes are marked on the bottom of the drawer[cassette]. NOTE DO NOT pull more than one drawer[cassette] out at a time. 4 Pinch the levers for the paper length guide plate and move the plate to fit the length of the paper that is to be loaded in that drawer[cassette]. The paper sizes are marked on the bottom of the drawer[cassette]. 3-2