Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 43

9 Start copying Section 4 BASIC OPERATION 10 At the end of copying Press the [Start] key. * Copying is possible once the lamp in the [Start] key is lit green and "Ready to copy" is displayed. Inch specifications Now copying. Orig. page 1 ------1 sided Top Edge 100% APS Count/Set 0/ 2 11x81/2 1 sided Sort Plain Output Left tray Cancel Job 1 Metric specifications Now copying. Original 1 ------- 100% 1 sided APS Rear Count/Set 0/ 2 Plain 1-sided Sort Job 1 Output Left tray Cancel Finished copies will be ejected onto the top tray or the left tray, as selected. IMPORTANT! • Up to 500 copies (standard copy paper: 60 g/m² - 90 g/m²) can be stored on the top tray, and up to 150 copies can be stored on the left tray. However, this limit may differ depending upon the type and conditions of the paper being used. • If "The top tray exceeds capacity. Remove the paper." ["Too much paper in top tray. Remove paper."] is displayed, there are too many copies on the top tray. Remove the copies from the top tray and then press the [Start] key to resume copying. • If ejected copies come out curled, or are otherwise not stored cleanly, remove the paper from the drawer[cassette] or the MP tray (whichever is currently being used), turn the paper over, set it again in that location and try to copy again. 4-5