Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 207

Accessing the copy default settings Perform the following procedure when you want to access the screens for each of the various copy default settings. 1 With the content of the "Basic" tab displayed, press the [Default Setting/Counter] key. The "Default setting" screen will be displayed. Section 7 COPIER MANAGEMENT 3 Use the keypad to enter the 4-digit management code. The factory default setting is "4000". Inch specifications Enter the administrator number. Close Metric specifications Enter the administrator number. Close 2 Press the "Copy default" key on the left side of the touch panel. Inch specifications Default setting / Counter Default setting Copy default Machine default Language MP tray setting Register orig. size Management Print report End Counter check User Adjustment Metric specifications Default setting / Counter Default setting Copy default Machine default Language Bypass setting Register orig. size Management Print report End Counter check User Adjustment 4 If the entered code matches the registered one, the "Copy default" screen will be displayed. Inch specifications Default setting / Counter Copy default Default menu Exposure mode Exposure steps Original image quality Auto Color/Full-Color/B&W Auto Color Correction Default setting Setting mode Manual 1 step Text+Photo Full-Color 3 Change # Close Up Down Metric specifications Default setting / Counter Copy default Default menu Exposure mode Exposure steps Image quality original Auto colour/full col./B&W Auto colour Correction Default setting Setting mode Manual 1 step Text+Photo Full-Colour 3 Change # Close Up Down NOTES • It is possible for you to change the 4-digit management code. (See "Changing the management code" on page 7-61.) • Refer to the desired procedure(s) explained under "Making copy default settings" and perform the corresponding setting(s). 7-67