Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 37

3 Slide the paper all the way in, along the insert guides, as far as it will go. IMPORTANT! • When you are setting paper onto the MP tray, make sure that the side facing upward when the package is opened is the side that is facing upward on the MP tray as well. In addition, if the leading edge of the paper is curled at all, straighten it out before setting it on the MP tray. • ALWAYS straighten out curled paper before setting it on the MP tray (Amount of curl: Copy paper - under 10 mm, Envelopes - under 5 mm) • If you are copying onto special paper, be sure to have finished copies ejected onto the left tray. (See "Copy eject location" on page 7-54.) • Be sure to push the MP tray extension back in, and open the insert guides as far as they will go BEFORE closing the MP tray. Section 3 PREPARATIONS When printing onto envelopes Set envelopes in the MP tray for printing. Up to 10 envelopes can be set on the MP tray at a time. For more details, refer to the Operation Guide for the Printer Kit. Refer to the following table for the types and sizes of envelopes that can be used in this machine. Acceptable envelope types Monarch Comm. #10 Envelope DL Envelope C5 Executive Comm. #9 Comm. #6-3/4 ISO B5 Envelope C4 Oufuku Hagaki YOUKEI 2 YOUKEI 4 Size 3 1/8" × 7 1/2" 3 3/8" × 9 1/2" 110 × 220 (mm) 162 × 229 (mm) 7 1/4" × 10 1/2" 3 7/8" × 8 7/8" 3 5/8" × 6 1/2" 176 × 250 (mm) 229 × 324 (mm) 200 × 148 (mm) 162 × 114 (mm) 234 × 105 (mm) Setting the envelopes on the MP tray Perform the following procedure and set the envelopes on the MP tray. 1 Open the MP tray. NOTE When you are loading paper onto the MP tray, make sure that the side to be copied onto is facing upward. 2 Adjust the insert guides to fit the width of the envelopes that are to be set on the MP tray. 3-5