Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 260

Paper Feeder, Document Finisher, Copying in the Sort mode

Page 260 highlights

Section 8 OPTIONAL EQUIPMENT Paper Feeder This paper storage unit has two 250-sheet capacity drawers[cassettes] similar to those included as standard equipment with your copier. • Paper capacity (each drawer[cassette])250 sheets (standard copy paper of a paper weight between 60 g/m2 and 90 g/m2) • Acceptable sizes of paper: 8 1/2" × 11", 11" × 8 1/2", 8 1/2" × 14" and 11" × 17" [A5R, B5R, A4R, A4, B4 and A3] Paper is loaded in these drawers the same manner as with the included drawers[cassettes]. (See page 3-1.) * An access cover is included on the right side of the unit just in case paper jams in either of these drawers[cassettes]. * Casters are attached to the bottom of the Paper Feeder. Document Finisher The Document Finisher stores a large quantity of copies and can sort multiple copy sets by shifting the position of ejection for each one. It can also staple the copy sets and/or punch holes in them as well. For more details, refer to the Operation Guide for the Document Finisher. * To prevent the copier from tipping over because of weight in the copier and the upper paper drawers[cassettes], the caster kit must be installed at the bottom-most Paper Feeder, when an optional Paper Feeder is installed with the copier. CAUTION To prevent the possibility of accidents due to tilting the copier body, always turn the desk's stopper bolts until they make firm contact with the floor during initial installation or whenever the machine is moved. CAUTION To prevent the copier from tipping over, the optional caster kit must be installed when the copier is installed with an optional Paper Feeder. IMPORTANT! Cautions during copying: • If copies come out curled or are stacked unevenly, turn the paper in the drawer[cassette] over. • When copying onto special paper such as OHP film, etc., be sure to specify the type of paper that is set on the MP tray. Copying in the Sort mode 1 Press the "Function" tab and then press the "Sort/Finished" key. The "Sort/Finished" screen will be displayed. Inch specifications Ready to copy. (Full-Color) Select paper Exposure mode Orig.image quality Sort/ Finished Basic 2 sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select orig.size Auto Selection Page # Cover Mode Function Combine Batch scanning Poster Booklet Color func. Paper Size Set 11x81/2" Up Down Program Metric specifications Ready to copy. (Full Col.) Select paper Exposure mode Iqmuaaglitey Sort/ Finished Basic 2-sided/ Split Reduce/ Enlarge MImaargg.insh/ ift Erase Mode User choice Select size orig. Auto Selection Page numbering Cover Mode Function Merge copy Large # of originals Poster Booklet Colour func. Paper Size Set Up Down Program 8-6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312

Section 8
OPTIONAL EQUIPMENT
8-6
Paper Feeder
This paper storage unit has two 250-sheet capacity
drawers[cassettes] similar to those included as standard
equipment with your copier.
Paper capacity (each drawer[cassette])250 sheets (standard copy
paper of a paper weight between 60 g/m
2
and 90 g/m
2
)
Acceptable sizes of paper: 8
1/2
" × 11", 11" × 8
1/2
", 8
1/2
" × 14" and
11" × 17" [A5R, B5R, A4R, A4, B4 and A3]
Paper is loaded in these drawers the same manner as with the
included drawers[cassettes]. (See page 3-1.)
*
An access cover is included on the right side of the unit just in
case paper jams in either of these drawers[cassettes].
*
Casters are attached to the bottom of the Paper Feeder.
*
To prevent the copier from tipping over because of weight in the
copier and the upper paper drawers[cassettes], the caster kit
must be installed at the bottom-most Paper Feeder, when an
optional Paper Feeder is installed with the copier.
Document Finisher
The Document Finisher stores a large quantity of copies and can
sort multiple copy sets by shifting the position of ejection for each
one. It can also staple the copy sets and/or punch holes in them as
well. For more details, refer to the Operation Guide for the
Document Finisher.
IMPORTANT!
Cautions during copying:
If copies come out curled or are stacked unevenly, turn
the paper in the drawer[cassette] over.
When copying onto special paper such as OHP film,
etc., be sure to specify the type of paper that is set on
the MP tray.
Copying in the Sort mode
1
Press the “Function” tab and then press the “Sort/Finished”
key.
The “Sort/Finished” screen will be displayed.
Inch specifications
Metric specifications
CAUTION
To prevent the possibility of accidents due to tilting
the copier body, always turn the desk’s stopper
bolts until they make firm contact with the floor
during initial installation or whenever the machine
is moved.
CAUTION
To prevent the copier from tipping over, the
optional caster kit must be installed when the
copier is installed with an optional Paper Feeder.