Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 284

Section 9 TROUBLESHOOTING 3 Open the reversing section cover (shown as (2) in the illustration) and remove the jammed paper without tearing it. (2) Misfeed in the optional Document Processor If the following display appears, an original has misfed in the Document Processor. In this case, the original set indicator will blink red. Perform the following procedure to remove the jammed original. Inch specifications Paper misfeed. JAM 1.Open document processor cover. 2.Lift up reversing unit. 3.Turn dial to left. 4.Remove original paper. 5.Close document processor cover. NOTE If the paper does happen to tear, remove any loose scraps from inside the copier. 4 Close all open covers and replace the Duplex Unit in its original position in the copier. Metric specifications Paper misfeed. JAM 1.Open cover of document processor. 2.Lift reversing unit up. 3.Turn left dial. 4.Remove original paper. 5.Close cover of document processor. 1 Remove all of the originals remaining in the original table. 2 Remove all of the originals that have been ejected onto the original eject. 9-16