Kyocera KM-C4008 C4008 Operation Guide Rev-2.0 - Page 290
MAINTENANCE AND OPERATION INFORMATION, Cleaning the main charger
View all Kyocera KM-C4008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
Section 10 MAINTENANCE AND OPERATION INFORMATION Cleaning the main charger Perform the following cleaning operation on the main charger if black lines appear on the copy image. 1 Open the front cover. 4 With the sponge portion of the grid cleaner up, attach it to the copier as shown in the illustration. 2 Grasp the green cleaning shaft (1), pull it out slowly as far as it will go and then push it back in all the way. Repeat this step 3 to 5 times. 5 Push up on the main charger release lever (2). Lift up slightly on the main charger (3), slowly pull out the main charger as far as it will go and then push it back in all the way. Repeat this step 2 to 3 times. (2) (1) 3 Take the supplied grid cleaner out of its package and remove the cap. (3) 6 Lift up on the main charger release lever and push the main charger back into its original position in the copier. NOTE The sponge portion of the grid cleaner contains fluid. Perform the cleaning operation as quickly as possible to prevent it from drying out. 10-2