Lantronix SLC 32 Lantronix SLC - User Guide - Page 177
: Maintenance, Firmware and Configurations
View all Lantronix SLC 32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
13: Maintenance This chapter describes the tasks that the system administrator performs by using the pages of the Maintenance tab and additional commands on the command line interface. It contains the following sections: Firmware and Configurations System Logs Audit Log Email Log Diagnostics Status/Reports Events Banners LCD and Keypad Note: The features and functionality described in this chapter specific to PC Card use are supported on SLC-02 part numbers. The features and functionality specific to USB port use are supported on SLC-03 part numbers. Firmware and Configurations The SLC device Firmware & Configurations page allows the system administrator to: Configure the FTP, SFTP, or TFTP server that will be used to provide firmware updates and save/restore configurations. (TFTP is only used for firmware updates.) Set up the location or method that will be used to save or restore configurations (default, FTP, SFTP, NFS, CIFS, USB port, or PC Card). Update the version of the firmware running on the SLC console manager. Save a snapshot of all settings on the SLC device (save a configuration). Restore the configuration, either to a previously saved configuration, or to the factory defaults. For dual boot SLC console managers, view the firmware version on each boot bank, select the bank to boot from, and copy the contents of one boot bank to the other. SLC™ Console Manager User Guide 177