Lantronix SLC 32 Lantronix SLC - User Guide - Page 54

Figure 6-3 IP Filter Page 6: Basic Parameters 1. Enter the following fields. Enable IP Filter Packets Dropped (view only) Packets Rejected (view only) Test Timer Time Remaining (view only) Select the Enable IP Filter checkbox to enable all filters, or clear the checkbox to disable all filters. Disabled by default. Displays the number of data packets that the filter ignored (did not respond to). Displays the number of data packets that the filter sent a "rejected" response to. Timer for testing IP Filter rulesets. Select No to disable the timer. Select Yes, minutes (1-120) to enable the timer and enter the number of minutes the timer should run. The timer automatically disables the IP Filters when the time expires. Indicates how many minutes are left on the timer before it expires and IP Filters are disabled. 2. Click the Apply button. Note: You cannot enable or disable individual filters. Configuring IP Filters Rulesets The administrator can add, edit, delete, and map IP filter rulesets. Note: A configured filter ruleset has no effect until it is mapped to a network interface. See To map a ruleset: on page 56 To add an IP filter ruleset: 1. On the IP Filter page, click the Add Ruleset button. Figure 6-4 shows the page that displays. SLC™ Console Manager User Guide 54