Lantronix SLC 32 Lantronix SLC - User Guide - Page 285
Appendix H: DC Connector Instructions
View all Lantronix SLC 32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 285 highlights
Appendix H: DC Connector Instructions The -48VDC plug connector is provided to make the input power connectors for your console server. The -48VDC input source should be circuit breaker or fuse protected at 5 amps. Input Voltage: -48VDC (acceptable range of -40 to -60 VDC) Max. Operating Current: 1.5 amps Max. Input Surge Current: 5 amps Continuous Power: 100 watts required Electrically isolated from any source Connected to reliable Earth ground The connector kit contains 6 pieces that make 2 complete -48VDC connectors as shown in Figure H-1. Figure H-1 Connector Kit Contents Caution: Ensure that the SLC power source is turned off while assembling the connector head. To assemble the DC plug connectors: 1. Use 16AWG copper wire to make the connections shown in Figure H-2. Figure H-2 Wire Connections -48VDC Battery Source Chassis/Earth Ground -48VDC Return (RTN) Insert screwdriver and press to open. 2. Strip a suitable amount of wire (~3/8") from each lead to be inserted into each connector position. SLC™ Console Manager User Guide 285