Lantronix SLC 32 Lantronix SLC - User Guide - Page 259
USB Commands
View all Lantronix SLC 32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
15: Command Reference Description Sets the acceptable range for the internal temperature sensor (an SNMP trap is sent if the temperature is outside of this range). show temperature Syntax show temperature Description Displays the acceptable range and the current reading from the internal temperature sensor. USB Commands set usb access Syntax set usb access Description Enables or disables access to USB devices. set usb modem Syntax set usb modem Parameters auth baud calleridcmd calleridlogging cbcpnocallback cbcptype chapauth chaphost chapsecret databits dialbackdelay dialbacknumber dialinlist dialoutlogin dialoutnumber dialoutpassword dodauth SLC™ Console Manager User Guide 259
15: Command Reference
SLCâ„¢ Console Manager User Guide
259
Description
Sets the acceptable range for the internal temperature sensor (an SNMP trap is sent if the
temperature is outside of this range).
show temperature
Syntax
show temperature
Description
Displays the acceptable range and the current reading from the internal temperature sensor.
USB Commands
set usb access
Syntax
set usb access <enable | disable>
Description
Enables or disables access to USB devices.
set usb modem
Syntax
set usb modem <U1> <parameters>
Parameters
auth <pap|chap>
baud <300-115200>
calleridcmd <Modem Command String>
calleridlogging <enable|disable>
cbcpnocallback <enable|disable>
cbcptype <admin|user>
chapauth <chaphost|localusers>
chaphost <CHAP Host or User Name>
chapsecret <CHAP Secret or User Password>
databits <7|8>
dialbackdelay <PPP Dialback Delay>
dialbacknumber <usernumber|Phone Number>
dialinlist <Host List for Dial-in>
dialoutlogin <User Login>
dialoutnumber <Phone Number>
dialoutpassword <Password>
dodauth <pap|chap>