Lantronix SLC 32 Lantronix SLC - User Guide - Page 47
: Basic Parameters, Requirements for IP Address Assignment
View all Lantronix SLC 32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
6: Basic Parameters This chapter describes how to set the following basic configuration settings for the SLC console manager using the SLC web interface or CLI: Network parameters that determine how the SLC console manager interacts with the attached network Firewall and routing Date and time Note: If you entered some of these settings using a Quick Setup procedure, you may update them here. This chapter contains the following sections: Requirements for IP Address Assignment Network Settings IP Filters Routing Note: The features and functionality described in this chapter specific to PC Card use are supported on SLC -02 part numbers. The features and functionality specific to USB port use are supported on SLC -03 part numbers. Requirements for IP Address Assignment If you assign a different IP address from the current one, it must be within a valid range, unique to your network, and with the same subnet mask as your workstation. To configure the unit, you need the following information: Eth1 IP address Subnet mask Eth2 IP address (optional Subnet mask (optional Gateway DNS SLC™ Console Manager User Guide 47