Lantronix SLC 32 Lantronix SLC - User Guide - Page 73

Figure 7-7 Date & Time Page 7: Services 1. Enter the following fields. Change Date/ Time Date Time Time Zone Enable NTP Synchronize via Select the checkbox to manually enter the date and time at the SLC location. Select the current month, day, and year from the drop-down lists. Select the current hour and minute from the drop-down lists. Select the appropriate time zone.From the drop-down list. Click the checkbox to enable NTP synchronization. NTP is disabled by default. Select one of the following:  Broadcast from NTP Server: Enables the SLC console manager to accept time information periodically transmitted by the NTP server. This is the default if you enable NTP.  Poll NTP Server: Enables the SLC device to query the NTP Server for the correct time. If you select this option, complete one of the following:  Local: Select this option if the NTP servers are on a local network, and enter the IP address of up to three NTP servers. This is the default, and it is highly recommended.  Public: Select this option if you want to use a public NTP server, and select the address of the NTP server from the drop-down list. This is not recommended because of the high load on many public NTP servers. All servers in the dropdown list are stratum-2 servers. (See www.ntp.org for more information.) Each public NTP server has its own usage rules --please refer to the appropriate web site before using one. Our listing them here is to provide easy configuration but does not indicate any permission for use. 2. Click the Apply button. SLC™ Console Manager User Guide 73