Lenovo NetVista Hardware Maintenence Manual for Netvista 6838 and 6848 systems - Page 46
Audio adapter, ADSL modem, Replacing the cover, Connector, Description
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Connector Description 1 Digital video interface Used to attach a digital monitor. This connector provides (DVI) connector the signals necessary to support the Display Power Management Signaling (DPMS) standard. 2 S-Video connector Used to attach a television set that has a S-Video connector. The S-Video cable (required to connect the television set to the adapter) is a separately purchased item. 3 SVGA monitor Used to attach an analog SVGA monitor to the AGP DVI converter connector. This SVGA converter is not used in this machine type. 4 SVGA monitor Used to attach an analog SVGA monitor to the AGP DVI converter connector. 5 Monitor cable Connects monitor to video output from computer Audio adapter Connector 1 MIDI/joystick connector 2 Audio line-out connector 3 Microphone connector 4 Audio line-in connector ADSL modem Depending on how the user's home or office is wired, the ADSL modem uses either wires 2 and 5 or wires 3 and 4 of the telephone-line wall connector. Refer to the label on the back of the ADSL modem and set the switch on the back of the ADSL modem to match the wiring scheme. If you do not know which wiring scheme to use, contact the user's ADSL service provider. Replacing the cover 1. Position the cover on the chassis, aligning the tabs on the cover with the slots on the chassis. 2. Slide the cover toward the front bezel of the computer until the cover snaps into place. 3. Replace the two screws and engage the keylock (if any). 38 IBM NetVista Type 6838, 6848: Hardware Maintenance Manual