Lenovo NetVista Hardware Maintenence Manual for Netvista 6838 and 6848 systems - Page 64
X-XXX 014-04X-XXX, Remove external parallel device, if
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Diagnostic Error Code FRU/Action 011-198-XXX Serial port test aborted 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 011-199-XXX Serial port test failed, cause unknown 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 011-2XX-XXX Serial port signal failure 1. External serial device 2. System board 014-000-XXX Parallel port Interface Test Passed 1. No action 014-001-XXX Parallel port Presence 1. Remove external parallel device, if present 2. Run setup, enable port 3. System board 014-002-XXX 014-003-XXX Parallel port Timeout/Parity error 1. System board 014-013-XXX 014-014-XXX Parallel port Control Signal/Loopback test failure 1. System board 014-015-XXX Parallel port External Loopback 1. Wrap plug failure 2. System board 014-027-XXX Parallel port Configuration/Setup error 1. Run Setup, enable port 2. Flash the system 3. System board 014-03X-XXX 014-04X-XXX Parallel port failure 1. System board 014-195-XXX Parallel port Test aborted by user 1. Information 2. Re-start the test, if necessary 014-196-XXX Parallel port test halt, error threshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 014-197-XXX Parallel port test warning 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 014-198-XXX Parallel port test aborted 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 56 IBM NetVista Type 6838, 6848: Hardware Maintenance Manual