Lenovo NetVista Hardware Maintenence Manual for Netvista 6838 and 6848 systems - Page 63
X-XXX 011-04X-XXX, Press F3 to review the log file
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Diagnostic Error Code FRU/Action 006-197-XXX Diskette interface test warning 1. If a component is called out, make sure it is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 006-198-XXX Diskette interface test aborted 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 006-199-XXX Diskette interface test failed, cause unknown 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 006-25X-XXX Diskette interface Error 1. Diskette drive cable 2. Diskette drive 3. System board 011-000-XXX Serial port Interface Test Passed 1. No action 011-001-XXX Serial port Presence 1. Remove external serial device, if present 2. Run setup, enable port 3. System board 011-002-XXX 011-003-XXX Serial port Timeout/Parity error 1. System board 011-013-XXX 011-014-XXX Serial port Control 1. System board Signal/Loopback test failure 011-015-XXX Serial port External Loopback failure 1. Wrap plug 2. System board 011-027-XXX Serial port Configuration/Setup 1. Run Setup, enable port error 2. Flash the system 3. System board 011-03X-XXX 011-04X-XXX Serial port failure 1. System board 011-195-XXX Serial port Test aborted by user 1. Information 2. Re-start the test, if necessary 011-196-XXX Serial port test halt, error threshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 011-197-XXX Serial port test warning 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test Chapter 7. Symptom-to-FRU index 55