Lenovo NetVista Hardware Maintenence Manual for Netvista 6838 and 6848 systems - Page 51
Replacing a processor, Speaker removal
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
2. Remove the board from the chassis. 3. Remove the processor from the old system board and install it on the new system board. 4. Remove any of the following installed options on the old system board, and install them on the new system board. v Memory modules 5. Ensure that the new system board jumper settings match the old system board jumper settings. Replacing a processor Make sure the processor is fully seated in its socket and that the goal post latches are engaged. Important: 1. Make sure the fansink and air baffle (if any) are installed to prevent processor overheating. 2. If the processor is not installed correctly, the system board and the processor can be damaged. Speaker removal 1. Remove the cover (see "Removing the cover" on page 26). Chapter 6. FRU information (service only) 43